Surtreat’s Product Line

TPS II is a multi-phase, inorganic, surface applied corrosion inhibitor for use on typical (3000-5000 psi), hardened concrete.

TPS IV is a hardener and surface protection agent for porous cement based concrete, block, mortar as well as stone and brick. TPS IV is a penetrating material.

TPS XV is a solution of an organic vapor phase migratory corrosion inhibitor. It is designed to be used as an admixture for reinforced concrete to inhibit rebar corrosion

TPS II N is an alkali silica reaction (ASR) inhibitor. TPS II N retains it’s ability to penetrate over the extended period of time. 

TPS IV S is a lithium silicate containing material for application to hardened concrete. It is designed to protect the concrete, and embedded reinforcing steel.

Repel WB is a ready to use stabilized water dispersion of advanced siloxanes designed to provide complete protection against water intrusion. Optimized for use on concrete, brick, stone, and mortar.

Repel 10 is a multi-phase, inorganic, surface applied corrosion inhibitor for use on typical (3000-5000 psi), hardened concrete. It is designed to protect reinforcing steel in concrete from corrosion on multiple fronts by penetrating the concrete surface and migrating to the steel.

Repel WB BIO is a solvent-free concentrated blend of siloxane and silane enhanced with a biostatic agent designed for job site dilution with clean water. 

SurCoPrimer – FRP Layer I (SCP I) is a surface applied vapor phase migratory steel corrosion inhibitor for application on concrete members prior to application of SurCoPrimer – FRP Layer II (SCP II).

SurCoPrimer–FRP Layer II (SCP II)is a surface applied concrete tensile strength builder. The average pull-off tensile yield strength is increased from 200 up to 400 psi as measured by ASTM C1538.

Surtreat Rust Converter is designed to provide an additional layer of protection for the embedded metal components during rehab and / or prior to placement.