Surtreat site icon

SURTREAT TPS XV – Steel Reinforced Concrete

SURTREAT TPS XV is a solution of an organic vapor phase migratory corrosion inhibitor. It is designed to be used as an admixture for reinforced concrete to inhibit rebar corrosion


Our formula makes for an outstanding one part corrosion inhibitor for steel reinforced concrete – old and new. This formula does not interact or disrupt the original curing process. With proven laboratory and site performance, our product can be applied to a variety of surfaces. The formula is also environmentally friendly, breathable, and extremely durable. It is simple to use – add it to the concrete mix directly, which improves concrete strength!Produces a long term/permanent outcomesthat extends the structure service life at a negligible cost!

Special Features

SURTREAT TPS XV added to the concrete mix migrates in a vapor form through the cement phase micro pores and deposit on the rebar surfaces where it furnishes corrosion protection at both the anodic and cathodic sites. SURTREAT TPS XV complies with the performance requirements of ASTM G109. Our product is not consumed in the course of the corrosion inhibition process, and does not have any impact on the concrete curing process. SURTREAT TPS XV improves concrete strength. SURTREAT TPS XV is added in a comparatively small quantity. SURTREAT TPS XV is particularly effective on concretes exposed to aggressive chloride containing environments. SURTREAT TPS XV is very compatible with other additives commonly used to improve concrete quality – air entrainment, water reducers, accelerating / retarding admixtures and superplasticizers.


5 gallon pail and 55 gallon drum.

Physical / Chemical Characteristics 

Boiling point: 212F
Specific gravity: 0.96
Flashpoint: None
pH: 8 – 8.5
Appearance and odor: amber color liquid with chemical smell
Shelf life: 24 months in an unsealed factory container
Storage: protect from freezing

Application Procedure 

Open container and remove the required quantity for concert mix size or prepare whole container. Place in concrete mix immediately after water addition.

Add separately from other admixtures.

Adjust water cement ratio volume to account for 75% liquid content in SURTREAT TPS XV.

Mix ratio –ordinarily 1 quart per 1 cubic yard is the effective quantity. This quantity can be adjusted depending on project requirements.


  • None known. Use as directed.


Caution and Safety

Handling: SURTREAT TPS XV is to be used by professional contractors only. All applicators should wear OSHA and NIOSH recommended protective equipment. Do not use or dilute the product in closed areas without adequate ventilation. Immediately close the container after removal of the solution. Avoid contact with skin, eyes and clothing. Do not smoke, eat or drink during application. Wash thoroughly after handling. Keep out of reach of children. Do not inhale or ingest or modify the solution. Refer to MSDS.

Clean Up: In case of spills or leaks, wear suitable protective equipment. Contain spill and collect with absorbent material or process and transfer to a suitable container, ventilate area. Avoid contact. Dispose of in accordance with current, applicable local, state and federal regulations.

Precautions: KEEP OUT OF REACH OF CHILDREN. DO NOT SWALLOW. Use with adequate ventilation. Avoid mist and direct contact with eyes, skin and clothing. Wear suitable protective goggles, gloves, and clothing. In case of insufficient ventilation, wear suitable respiratory equipment. If you feel ill, seek medical advice. Wash clothing prior to re-use.



437 Grant Street, Frick Building Suite 1210, Pittsburgh, PA 15219 USA