TPS IV

Industrial Concrete Densifier for High-Traffic & Heavy-Load Surfaces

Strengthen & Harden Concrete for Maximum Durability

TPS IV is a penetrating concrete densifier designed to reduce porosity, increase wear resistance, and enhance durability. By chemically reacting with the concrete substrate, it strengthens surfaces without forming a film or residue, making it ideal for high-traffic industrial applications.

Key Benefits

✅ Strengthens and hardens concrete surfaces.

✅ Reduces porosity for improved durability.

✅ Enhances wear and impact resistance.

✅ Deep penetration without forming a surface film.

✅ Creates a chemically resistant surface for industrial environments.

✅ Extends the lifespan of high-traffic concrete.

✅ Compatible with coatings, overlays, and treatments.

✅ Breathable formula—will not trap moisture.

Application Guide

Surface Preparation: Ensure surfaces are clean and free from coatings, paints, or contaminants that may inhibit penetration. If necessary, clean with SurCoClean before application.

Application Method: Apply using a roller, brush, or low-pressure sprayer. Ensure the surface is evenly saturated.

Absorption & Drying: Allow the product to fully absorb into the surface. Typical drying time is one hour between coats, depending on environmental conditions.

Reapplication & Compatibility: A minimum of two applications is typically required. Compatible with repair mortars, overlays, coatings, FRP, and membranes.

Technical Data

Packaging	5 gal pail, 55 gal drums, 275 gal IBC totes
Appearance/Color	Clear amber liquid
Flashpoint	212°F
Shelf Life	24 months in unopened factory container
Storage Conditions	Protect from freezing