TPS XV DTM
Direct-to-Metal Corrosion Inhibitor for Steel
Vapor-Phase Protection for Steel & Post-Tensioned Cables
TPS XV DTM is a 40% solvent-based vapor-phase corrosion inhibitor designed for direct-to-metal applications. It actively protects steel structures, post-tensioned cables, and rusted metal surfaces by adsorbing onto all metal surfaces, preventing further corrosion at both anodic and cathodic sites. The inhibitor migrates within confined spaces, making it ideal for cable bundle injection and other hard-to-reach areas.
Key Benefits
Application Guide
Surface Preparation: Ensure surfaces are free of loose rust, debris, and contaminants. For best results, remove any dirt or oils before application.
Application Method: TPS XV DTM can be applied by brush, roller, or low-pressure spray. For post-tensioned cables, inject at a rate of 100-125 milliliters per meter.
Absorption & Drying: Allow the inhibitor to absorb into the surface. The protective layer forms as the solvent evaporates.
Reapplication & Compatibility: If additional protection is needed, a second application may be performed. TPS XV DTM is compatible with most coatings and sealants.
Technical Data
| Packaging | 5 gal pail, 55 gal drums, 275 gal IBC totes |
|---|---|
| Appearance/Color | Clear liquid |
| Flashpoint | 254°F |
| Shelf Life | 24 months in unopened factory container |
| Storage Conditions | Protect from freezing |
Safety & Handling
Flammable Liquid: TPS XV DTM should only be applied in well-ventilated areas and kept away from sources of ignition.
Personal Protection: Wear protective gloves, goggles, and a respirator if applying in enclosed spaces.
First Aid: In case of inhalation, move to fresh air. If ingested, drink water and seek medical attention immediately.