VCI SYSTEM (Primer + Top Coat)
This epoxy-polyamide, two component, lead and chromate free primer coating is designed to conform the specific composition and performance requirement of Federal Specification MILDTL-24441/20A (SH) Formula- I 50, Type-Ill, and is recommended to be used for painting land and marine structures. Surtreat vapor phase corrosion inhibitor (VCI) is added to
Part A in an amount that when combined with Part B the applied dry film solids will contain 2.5 Wt. % of VCI solids.
Polyurethane Top Coat included in the system conforms to specification, composition and performance requirements of Federal Specification MIL-PRF- 85285, it is a 2 component Polyurethane Top Coat.
Both products are color gray.
This epoxy-polyamide, two component, lead and chromate free primer coating is designed to conform the specific composition and performance requirement of Federal Specification MILDTL-24441/20A (SH) Formula- I 50, Type-Ill, and is recommended to be used for painting land and marine structures. Surtreat vapor phase corrosion inhibitor (VCI) is added to
Part A in an amount that when combined with Part B the applied dry film solids will contain 2.5 Wt. % of VCI solids.
Polyurethane Top Coat included in the system conforms to specification, composition and performance requirements of Federal Specification MIL-PRF- 85285, it is a 2 component Polyurethane Top Coat.
Both products are color gray.
This epoxy-polyamide, two component, lead and chromate free primer coating is designed to conform the specific composition and performance requirement of Federal Specification MILDTL-24441/20A (SH) Formula- I 50, Type-Ill, and is recommended to be used for painting land and marine structures. Surtreat vapor phase corrosion inhibitor (VCI) is added to
Part A in an amount that when combined with Part B the applied dry film solids will contain 2.5 Wt. % of VCI solids.
Polyurethane Top Coat included in the system conforms to specification, composition and performance requirements of Federal Specification MIL-PRF- 85285, it is a 2 component Polyurethane Top Coat.
Both products are color gray.
PRINCIPAL CHARACTERISTICS:
Excellent rust preventative properties in adverse or chemically polluted atmospheres.
Corrosion inhibiting properties are increased by a factor of 5 to 10 times due to addition
of the VCI agent that will migrate through a rusty surface and inhibit further steel. surface corrosion.
Will inhibit corrosion of both fresh and salt corroded steel surfaces.
Easy application by brush and airless spray.
Good adhesion properties on white steel when surface is abraded and on rusty steel
surface due to corrosion texture and achieve adhesion rating of 5B per ASTM B 117.
Excellent water and weather resistance for interior and exterior use.
Resistance to spill/splash of mild chemicals.
DOWNLOADS
VCI PRIMER Technical Data Sheet
VCI PRIMER Safety Data Sheet Part A
VCI PRIMER Safety Data Sheet Part B
Polyurethane Top Coat Technical Data Sheet
Polyurethane Top Coat Safety Data Sheet Part A